Get Your Profits Out Of The Scrap Cart And Into Your Pockets! Don't Like To Glue? We Do.
To edge glue our wide boards we use the "glue wheel".
Do you often end up with a scrap pile too narrow to use for another product? Well your not alone. It can be costly when your project requires one or two widths, and your working with the random widths of hardwood lumber.
The investment for equipment and time to glue the edgings robs a woodworker from the talents better spent making products. As an example, let's use an order for drawer sides ½"x5". We will start with $1000, for 500' of 6/4 lumber and surface it two sides to 1-7/16", then rip one edge to a rough size of 5-½" for an additional $65. A common waste factor is 1/3, (1,000 + 65=1065/3= $355) so we have $355 of the investment to save from the scrap pile by gluing up the edgings. Next we resaw the solid ripped pieces and the glued blanks for $60 so the whole order is ready to make drawer sides ($355-$60=$295). You've reclaimed $295 from the scrap pile.
Call us toll-free at 800-292-5937 to see if we can help get your profits out of the scrap pile and into your pockets.
Custom Panels
After the glue dries we send our wide boards through the planer.
The panels we produce are custom made to order in widths up to 29" and in thickness and length of your choice. They are available in over 40 species of domestic and imported woods. Orders for panels 8' and shorter are usually available in 3 days. To avoid a $30 minimum machine charge, orders should exceed a total of 15 square feet. Panels are not trimmed to length, but have sufficient over length. Please call for sizes not listed and quantity discounts.
Solid Wood Panels
Made from random width lumber glued up and dimensioned to specified size. Care is taken to match grain, figure and color in each panel. Large quantities available with several days notice. Other sizes not listed are available by special order. Contact us for your specific quote. Prices current as of October 2011.
